Product Details
Product DescriptionNote: On all roller shades, the width ordered will be from “tip to tip” of the operating mechanism. For proper operation, the fabric width will be narrower than the width ordered. This can produce small light gaps on each side of the shade. To compensate, you may want to order an outside mounted shade. Also, due to the characteristics of some shade materials, some shades tend to track to one side or the other. These characteristics should not be considered a defect.
Product Specifications- Width: 15” to 103”
- Length: 12” to 120”
Mounting Specifications:- Minimum Inside Mounting Depth: 1 ¼” (with Cassette Valance: 1 ¾”)
- Flush Inside Mounting Depth: 2 ½” (with Cassette Valance: 4”)
- Minimum Outside Mounting Surface: 1 ½” (with Cassette Valance: 2 7/8”)
- Cassette valance measures 3″ (Height) x 3 1/4″ (Depth) – Brackets will add approximately 3/8″ to the depth
- Fabric is woven 100% polyester has the same color on both sides with a crisp, modern look
- Colors are not an exact match with the blackout product. Order samples to ensure you are getting the color you want
- Due to fabric restrictions shades over 94″ wide will be railroaded (turned sideways); Shades over 94″ wide AND 84″ high will be railroaded and have a horizontal seam
- Conforms to C.P.S.C. child safety guidelines
Important DetailsFactory Inside Mount Deduction (Tip-to-tip): 1/8″
Factory Inside Mount Fabric Deduction (Width) – Spring Lift: 1 5/8″ (approx.) – for proper operation
Factory Outside Mount Fabric Deduction (Width) – Spring Lift: 1 1/2″ (approx.) – for proper operation
Factory Inside Mount Fabric Deduction (Width) – Continuous Cord Loop w/ Size < 72″W x 72″H: 1 1/4″ (approx.)
Factory Outside Mount Fabric Deduction (Width) – Continuous Cord Loop w/ Size < 72″W x 72″H: 1 1/8″ (approx.) Factory Inside Mount Fabric Deduction (Width) – Continuous Cord Loop w/ Size > 72″W x 72″H: 1 1/8″ (approx.)
Factory Outside Mount Fabric Deduction (Width) – Continuous Cord Loop w/ Size > 72″W x 72″H: 1″ (approx.)
Factory Inside Mount Fabric Deduction (Width) – PII Rechargeable Li-ion Motorization: 1 1/4″ (approx.)
Factory Outside Mount Fabric Deduction (Width) – PII Rechargeable Li-ion Motorization: 1 1/8″ (approx.)
All factory measurements and deductions can have a ±3/16″ variance
Reverse roll shades that are Inside Mount with the Spring Lift (Cordless) must be top mounted, this will create a larger light gap at the top of the window opening that will vary based on the shade height (taller shades will have less light gap)
Reverse roll shades that are Inside Mount with the Spring Lift (Cordless) must have the slotted bracket mounted backwards, facing the open end of the slot towards the window.
Reverse roll shades that are Outside Mount with the Spring Lift (Cordless) must have the slotted bracket mounted backwards for wall mounts to allow for proper installation
Cordless spring roller brackets are metal and silver in color. There is no bracket cover for this bracket
Cassette valance colors and end caps (coordinated to fabric color): White, Vanilla, Brown, Silver, or Black
Concealed Hem Bar: Plain tailored hem style only, no fringe options
Concealed Hem Bar: Hem bar is inside a sewn hem pocket. Unfinished threads will be present on the back of the hem. Trim longer threads with scissors if necessary
All factory measurements and deductions can have a ±3/16″ variance
Mounting hardware included (wall anchors and/or specialty screws may be required based on your mounting surface – not included)
There are no reviews yet.