Natural woven wood shades provide a rich timeless look perfect for any room. The classic roman style shade construction is practical and reliable allowing the shades to lift evenly and stack into neat folds. The cordless motorized operation is a radio frequency remote control that lets you lift and lower the shade from anywhere in the house. Economical battery powered motors can be recharged up to 500 times for many years of reliable service. An integrated valance conceals the operating mechanism and provides a clean appearance.
Woven woods are a natural shade that is made with materials harvested from nature. Kiln drying minimizes warping of the bamboo and other natural materials which are then woven on hand fed looms for consistent quality. Each harvest of natural fibers is unique and will have variations in color, grain, texture, striations, and warping. As a result of these inherent qualities, no two shades are identical, nor can they be. Over time exposure to light will soften and slightly darken the color of the shade. Small cracks in bamboo slats are natural and unavoidable. Due to the natural characteristics of the product, there may be a 1/2″ to 3/8″ variance on length.
- Width: 20” – 72”
- Length: 24” – 72”
- Headrail: 5/8”H x 2 3/8”D
- Valance: Integrated color matching
- Shade stacking height: 9 1/2” approx.
Post style brackets can be mounted to top/ceiling or rear/wall. Side mount is not available. No other bracket types are offered for this product.
This shade is Un-Lined. No liners are available. This product is not intended to provide privacy. The shade material is see-through.
Minimum Depth Requirements for mounting brackets are as follows:
- Inside Mount: 1 ¾”D
- Inside Flush Mount: 2 3/4”D
- Standard Factory Deduction on Inside Mount: 3/8”
- Light Gap (per side): 3/16”
Important: Due to the natural characteristics of the product there may be a 3/8″ to 1/2″ variance on length – shade length may relax over time. All factory measurements have a +/- 3/16” variance. Mounting hardware included (wall anchors/ specialty screws may be required for your mounting surface- not included)